Flanges
Sheets-Plates & Coils
We are also stainless steel hex bar suppliers, which is readily available in stock in various grades and sizes. Stainless steel hex bar are long, hexagon shaped bar, it is flexible to use in different manufacturing application due to its corrosion resistance and high strength. It is used in the manufacturing of nuts, valves, hose ends, fasteners and bolts. Stainless Steel hex bar grades are 301, 302, 304, 310, 316, 321/321H, 347/347H etc.
Bars & Rods Specification
| Bar Standard | ASTM A276, ASTM A479, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM A276 Type Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM A276 Type Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| SUS T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Stainless Steel Flat Bars Condition | Hardened & tempered, annealed |
| ASTM A276 Type Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rod Processing | Bar cutting to 650mm |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Our Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 | |
Processing Of Bars & Rods
|
Round bar Cutting |
Products cut include Round bars, Flat bars, Hex bars, Square bars, Tubing and Hollow bars, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
|
Round bar Production Cutting |
We can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
|
Round bar Polishing |
Products polished included all tubular products, with OD & ID polishing available, Round bars, Square bars, Hex & Flat bars, Angles, Uneven Leg Angles, beams, and other shapes. |
|
Stainless Steel
|
ASTM A479, A182 - 304, 304L, 304H, 316, 316L, 316H, 316Ti, 309, 310, 317L, 321, 347, 904L, 17-4PH & 400 Series |
|---|---|
|
Titanum
|
ASTM B348 Gr. - 1, 2, 3, 5 (6AL - 4V), 7,9,11,12,23 (6AL - 4V ELI) |
|
High Nickel Alloys
|
Hastelloy, Nickel, Monel, Inconel, Incoloy, Alloy-20 & Cupro Nickel |
|
Duplex
|
ASTM A182 / UNS S31803 & S32205 (2205) |
|
Super Duplex
|
ASTM A182 / UNS S32750 (2507) & S32760. |
|
High Speed Steel
|
M2, M3, MJ5, M42, T1, T4, T15, T42, D2, D3, H11, H13, OHNS -01 & EN-52 HCHCR & OHNS in Grades |
|
Non Ferrous
|
Copper, Brass, Aluminium, Phosphorus, Bronze, Gun Metal, Lead |
|
Finish
|
Bright, Polish, Black |
|
Hardness
|
Soft, Hard, Half Hard, Quarter Hard |
|
TEST CERTIFICATES
|
MTC, IBR & Third Party Inspection |
Stainless Steel Round Bar
Range: 3.17 MM TO 350 MM DIA
Type : Round Bar, Bright Bar, Black Round Bar, Forged Bar, Hex Bar, Flat Bar, Rod
Tolerances : h11
Surface Finish : Cold drawn or Belt polished condition
Available Grade: 202, 303, 304, 304L, 316, 316L, 316Ti, 310, 310S, 321, 317L, 347, 347H, 904L, 17 4PH, 15 5PH, 410, 420
.Nickel Alloy Round Bar
Range: 3.17 MM TO 350 MM DIA
Type : Round Bar, Bright Bar, Black Round Bar, Forged Bar, Hex Bar, Flat Bar, Rod
Tolerances : h11
Surface Finish : Cold drawn or Belt polished condition
Available Grade: INCONEL 600, 601, 625, 718, 800, 800H, 800HT,825, 925. SMO 254, ALLOY 20(20CB3), MONEL 400, 500K, RA 330, HASTELLOY C-276, HASTELLOY B2, B3, TITANIUM Gr 1 to 5
Duplex/ Super Duplex Round Bar
Range: 3.17 MM TO 350 MM DIA
Type : Round Bar, Bright Bar, Black Round Bar, Forged Bar, Hex Bar, Flat Bar, Rod
Tolerances : h11
Surface Finish : Cold drawn or Belt polished condition
Available Grade: UNS S31803 (F51), UNS S2205 (F60), UNS S32750 (F53), UNS S32760 (F55)
Alloy Steel Round Bar
Range: 3.17 MM TO 350 MM DIA
Type : Round Bar, Bright Bar, Black Round Bar, Forged Bar, Hex Bar, Flat Bar, Rod
Tolerances : h11
Surface Finish : Cold drawn or Belt polished condition
Available Grade: SAE 1018, SAE 8620, SAE 1010, EN Serise, C45, EN 42 J
Copper Nickel Round Bar
Range: 3.17 MM TO 350 MM DIA
Type : Round Bar, Bright Bar, Black Round Bar, Forged Bar, Hex Bar, Flat Bar, Rod
Tolerances : h11
Surface Finish : Cold drawn or Belt polished condition
Available Grade: Copper Nickel 90/10 and Copper Nickel 70/30
Forged Round Bar
Nemi Steel & Alloys Industries stocks a full scope of round bar from 1/16″ round through 26″ in measurement. Almost all evaluations of steel are supplied in round bar.
- Port of Dispatch: any
- Production Capacity: ready stock
- Packaging Details: as per customer requirment
154 PH Round Bar
15-4ph is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-4ph alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape.
- Aircraft Components
- High Pressure Corrosive Fabricated Parts Such As Valves
- Fittings And Gears
| Specification | Product Form |
| ASTM B265(Gr2 | Sheet,Strip and Plate |
| ASTM B338 | Tube,Seamless and Welded |
| ASTM B348(Gr2) | Bars and Billets |
| ASTM B861 | Seamless Pipe |
| ASTM B863 | Wire |
| ASTM F67(Gr2) | Unalloyed Titanium for Surgical Implants |
Bright Round Bar
Our in-depth domain expertise assists us in manufacturing, exporting and supplying a wide range of Mild Steel Bright Bright Round Bars that are made from top quality raw material to ensure durable performance in every application. Our bright steel round bars are available in various dimensions and find applications in diverse industries.
- Production Capacity: 70,000 metric tons
- Port of Dispatch: any
- Delivery Time: ready stock
- Packaging Details: as per buyer's requirement
| Unit Length | All standard lengths |
| Thickness/Diameter | 0-1 inch, 1-2 inch, 3-4 inch, >4 inch, 2-3 inch |
| Single Piece Length | 18 meter, 3 meter, 36 meter, 6 meter |
| Shape | Square |
| Technique | Hot Rolled |
Hex Bar
Hexagonal bar is a highly versatile engineering material. Typical applications include fasteners including bolts and nuts and in the production of repetitively turned parts.
- Delivery Time: ready stock
- Packaging Details: as per buyer's requirement
| Shape | Hexagonal |
| Range | 12mm-45mm diameter |
| Technique | Cold Rolled |
| Usage | Industrial |
| Finish | Polished |
Square Bars
We are one of the conspicuous names in the industry for the inclusive range of Square Bar for our valuable customers. We are offering these square bars at leading market rates. Apart from this, these square bars are available in varied sizes to suit the requirements of our customers.
- Delivery Time: ready stock
- Packaging Details: as per buyer's requirement
| Shape | Square |
| Thickness/Diameter | 2-110 mm |
| Tensile Strength | 410 Mpa |
| Is It Rust Proof | Rust Proof |
